Grease injection.
There is an oil groove between the valve body and the sealing surface, which can inject grease into the valve seat at any time through the oil nozzle to increase the sealing performance
Archives: Answers
answer
金洋2娱乐平台网页版
After unscrewing the protective cap, pay attention to cleaning the dirt on the grease injection nozzle, and connect the sealweld supergun head with the grease injection nozzle, then start to grease injection.
When the valve channel is filled with grease, stop to grease injection.
After greasing, clean the grease nozzle and cover the grease cap to ensure that the grease cap is tightened.
To ensure the grease injection effect of the valve, the valve can be opened and closed several times to ensure that the valve surface is lubricated evenly to achieve the purpose of grease injection.
The valve can make pressure test.
After the pressure test, please clean up the excess grease in the valve channel.
金洋2娱乐平台官方入口
As usual open 2~3 times need add the grease injection.
金洋2娱乐官网最新网址
Applicable to petroleum, petrochemical, pharmaceutical, chemical fertilizer, electric power industry, etc.
金洋2娱乐平台老虎机
The hardness of valve adopts nitriding treatment, hardfacing & spraying, such as STL. spraying tungsten carbide. N60, etc
金洋2娱乐平台
Yes, we have experience in Bitumen field.
金洋2娱乐平台
It will not cause abrasion on the sealing surface.
金洋2娱乐平台老虎机
Bi-directional type, and provide convenience for installation.
金洋2娱乐平台网页版
Yes,it can be used for particulate media,but not suitable for large particles
金洋2娱乐官网最新网址
The valve seat is generally welded with 304.316 and if the condition need wear resistance and scouring,we can use STL etc.
金洋2娱乐官网注册网站
General valve
金洋2娱乐官网注册开户
Its sealing is realized through the sealing ring around the valve. The unique dovetail groove guarantees and the shareholder sealing ring.